About Me

Hello, I’m from Chandigarh (India), 32 yrs old, graduated in 2000 from Indo Swiss Training Centre, (Chandigarh, India). Specialized in Die & Mould and nowadays work on Product Development. Spend most of my time with family and friends. I love to hangout with friends and meet new people. Love to listen to soft romantic music (mostly Hindi and Punjabi).  Project Manager cum Design Engineer with over 9 years of experience. Currently located in Chandigarh, India.

Certified SolidWorks user from last 7 years. I am open any time to discuss about SolidWorks. I simply love the software. You can also find me on these SolidWorks forum/groups.

SolidWorks Discussion Forum

SolidWorks Geeks

SolidWorks Yahoo! Group

SolidWorks Asia-Pac Blog

SolidWorks India Community

My SolidWorks Certfications

Gifts from friends on SolidWorks Discussion Forum

Thanks a lot for your time and visiting my blog 🙂

You are free to share, distribute or transmit any work on this blog under the Licensing conditions.

SOLIDWORKS Yacht Tutorial Free eBook

91 Comments

  1. Jamie

    Hey Deepak,

    I often browse the various Solidworks forums for help with various things.

    78% of the time the correct answer comes from you. I hope Dassault have you on a retainer.

    Thanks!
    Jamie

    Reply
    1. Deepak Gupta (Post author)

      Jamie, thanks for the kind words. It is just out of my interest to help the community.

      Reply
    2. huplaque - Wim

      Hi Deepak, I totally agree with Jamie.. Just don’t know for sure about the 78%.. 😉
      It’s very generous of you to share your knowledge and put in your effort helping people with their SWX issues!

      Reply
      1. Deepak Gupta (Post author)

        Hi Wim, thanks for the kind words 🙂

        Reply
  2. Pingback: Taking the Zonda for a Spin! & Other Assorted Renderings #KeyShot #SolidWorks #PhotoView 360 « Michael Lord

  3. Do Brach

    hi Deepak

    I got a few tip and tricks from you in the past–it’s awesome!

    I have one more problem, you know when click on face of any solid model and then you click on ‘measurement tape’, it gives ‘perimeter and area’ of face. Is there any way to link this two properties into drawings title block like those of custom properties???

    Thanks
    Do

    Reply
    1. Deepak Gupta

      You may use equation to do that but that would be useful only with simple parts.

      I’m not sure how much a macro will be useful here or how complex a macro can be made.

      Check this post: https://forum.solidworks.com/message/22293#22293 and see if Brian can share the macro he made.

      Reply
  4. John Leslie

    Hi Deepak,

    I have a great macro for creating 1:1 laser cutting profiles by adding a sheet within an existing drawing and various other related functions.

    This much used macro recently stopped working after an upgrade to 2012 and now freezes Solidworks part the way through every time I run it, can you assist me with how to get it running again please?

    Thanks
    John

    Reply
    1. Deepak Gupta

      Sent you an email. Can you send the macro to test and fix.

      Reply
  5. sai

    I would like to open all drawings in a floder and save it in same location, can I get an API?

    Reply
    1. Deepak Gupta

      Check macros shared over here and you can edit one of that: https://forum.solidworks.com/message/245329#245329

      In case you are not able to do that, let me know and I’ll create one for you quickly.

      Reply
  6. srinivasa raghavan

    hw can i genreate a drawing from a part file with dimensions using Macro in solidwrks

    Reply
    1. Deepak Gupta

      Check this macro: Fast Draw

      Reply
  7. david

    Hi Deepak,
    Can you help. I am trying to find a macro that will rename weldments and sheet metal parts to the drawing number and append the item number to the end (I am using 2012) Als take this through to the dxf file as a note. Is this possible

    Thank you

    David

    Reply
    1. Deepak Gupta

      Don’t have a macro or I know of but should be do able. Can you send me some files with and without required results, so that I can look at them compare and prepare some macro.

      Reply
  8. Blair Regan

    Hi
    We are developing a application where we want to capture the event when the user clicks on a table in a solidworks drawing. We would then open a dialog box showing data that the table can be populated with.

    Where would we find info on either; a) locking the table (so users have to edit it through a macro) or; b) capturing the mouse click the user makes on any row or column inside the table?

    Thanks for info you may have.
    Blair

    Reply
    1. Deepak Gupta

      I’ll try to look into it.

      Reply
  9. Aswinkumar Rajendiran

    Hi Deepak,

    Please checkout http://www.youtube.com/watch?v=St05oIWGoGY

    Let us know what you think?

    Thanks,

    Reply
  10. Chris

    Hi Deepak,

    I am very impressed with a lot of your macros and API work that I’ve come across on the internet. I’m also digging your blog.

    I’m wondering if you could help me out with an issue. I’ve done a macro that looks through folders and opens all of the Solidworks drawing files and through input boxes that the user fills out finds and replaces annotations. It works perfect except for one thing: After it replaces all the annotations, the pop-up telling you that it replaced the annotations comes up on EVERY drawing. This defeats the purpose of automating this process because the user must still sit there and hit OK for every drawing (and we’re doing a large quantity of drawings at a time). Do you know if it’s possible to temporarily disable these pop-up messages?

    If you could contact me via e-mail, that would be great.

    Thanks,
    Chris

    Reply
  11. TEJPAL SINGH

    hello deepak sir..
    i recently completed my B.tech in mechanical stream…now i want to learn some about design engineer…so kindly prefer me that which institute i will have to go for this….

    THANKS….

    Reply
  12. Marco Polo

    Hi Deepak, im a designer from ABB mexico and i made some macros but only a have learn with the help in api SW so, i want to know if you have some literature for macros?

    thanks a lot

    Reply
    1. Deepak Gupta

      Not really but I take help from API help files and some sites which are having free macro available to download. If you need I can get their address to you. Also there are some books you can refer to.

      Reply
  13. Zildom

    Congratulations on the blog, you could teach how did that animation winding and unwinding the rope on the reel?

    Reply
    1. Deepak Gupta

      Thanks. Yes I’ll be putting up the step by step tutorial on that soon.

      Reply
  14. pratik

    Hi

    I need some help regarding spur gears in Solidworks 2010.

    I want to create a spur gear of module 0.3 mm and number of teeth 9. But the problem is that whenever I create a spur gear from the toolbox, the minimum number of teeth that can be obtained is 10.
    Please provide me a solution to this.

    Reply
    1. Deepak Gupta

      Sorry missed you comment. You can use equations to get the GEAR or refer to machinery hand book for gear dimensions.

      Reply
  15. vino

    Hi Deepak, need your help for creating a box using VBA around the loops(only bosses) in a face and check whether a point lies inside this box……And evaluate the area of the box…Any ideas appreciated….

    Reply
  16. vin

    Hi deepak, need your help and your email address, please send me an email

    Reply
  17. mkartheekraj

    Hi Gupta, this is Kartheek Raj.

    I need a macro to delete the tangent edges removed in the drawings.

    Reply
    1. Deepak Gupta

      There is no way to delete the tangent edges, you can just show them or hide.

      OR do you looking for something specific.

      Reply
  18. Eran Cen

    Hello,

    I’m trying to contact you but I can’t find any Email Address.

    Please contact me via my email

    Thanks!

    Reply
    1. Deepak Gupta

      Eran, did you got my email???

      Reply
  19. Vishal Kokane

    Hiiii Deepak Sir, I am a advanced solidworks user & working in one of the reputed Elevator industry as a design engineer & wants your guidance regarding the rope pulley animation as we are frequently using them. I will be thankful to you if you help me out

    Reply
  20. Mark Stapleton

    Hi Deepak. You’ve requested that I send you a Drawing and associated Part to help in diagnosing a problem with inability to delete annotations and dimensions in SW2011 SP4, but I’m having trouble finding an email address for you. You can find my contact information and email me directly on my Web site, although naturally I’m reluctant to POST my email address (spambot concerns).

    That said, I don’t think this has anything to do with particular Drawings, Parts or Assemblies. It doesn’t matter what drawing I choose or who made the drawing, or even what SP was in force when the Drawing was made — it’s all the same. No Delete functionality available to me with SP4, and that’s new from “upgrading” from SP3.

    Thanks and best regards (two big “thumbs up” for being so helpful to so many users — you’re obviously a great guy).

    Mark Stapleton
    Watermark Design, LLC
    Charlotte, North Carolina, USA

    Reply
    1. Deepak Gupta

      Sorry Mark I forgot to email you after my comment, just sent the email.

      Thanks for the compliments 🙂

      Reply
  21. Masoud

    Hello!

    This question came to me that> you want my help?

    The water Tsfhh solidworks design software I have? Now I’m entering the water system How can I do this

    Reply
  22. Luis Carlos Botero

    Hi Deepak, i,m Luis Carlos from Colmbia, actually i,m the one who approve the drawings in the company, but i hate the paper and the seals, i would like to view the solidworks file (Drawing file) and put the digital seal there to make the impression already with the seal, just like i can do in edrawings, but in the drawing interface. I don’t know if that could be a macro, or there could be an easier way to do it.

    PD: I don´t know anything about macros :s.

    Reply
    1. Deepak Gupta

      There are two ways:

      1 Using a macro

      2 Using library notes.

      Reply
  23. recep tek

    hi,
    thanks for the informations,they are very useful.ı have a question about gear sets,can you give some tips about drawing a gear boxes which includes spur gears,helical gears,bevel gears and shafts etc.

    Reply
    1. Deepak Gupta

      If I can know as what kind of information you would be looking, it’ll be easy for me to help you with something.

      Reply
  24. Jason Corl

    Hi Deepak,

    Wanted to say thanks for all the help and great tips you seem to put a ton of time, effort, and experience into, you’re help is invaluable to the SolidWorks community.

    I do have a question on a macro I’m trying to use that I found on Matthew Lorono’s website. It says you are the author so I figured I’d try to ask you before Matt.

    Using the Change_Sheet_Format.swp macro, I have created an updated drawing template that contains an updated property link and updated text. I need to update all of my drawings, only about 35 or so, in a directory to the new format. I have tried the macro and it worked for updating the property link but did not update the text which is on the sheet format, not on just on the drawing sheet. Any ideas how to get the text to update too? I can send you the files if you like.

    Thanks!

    Reply
    1. Jason Corl

      FYI, I have tried to manually update the sheet format and it works as it should. I stated that I created a new drawing template, but I forgot to mention that I did save out the sheet format also, and tested manually.

      Reply
      1. Deepak Gupta

        If you looking to add the notes also which are not there in the sheet format but are on the sheets, then macro can be edited to insert the notes as well.

        Reply
    2. Deepak Gupta

      I haven’t tested the macro earlier for any text. But I just ran it and it worked on putting up the text contained with in the sheet format. Is this what you need??

      Or do you want to include the text too which is on the drawing??

      Reply
      1. Jason Corl

        Hey Deepak, thanks for the reply. For example, I have my title block which contains annotations that are linked to the part/assy document properties that are on the sheet. I have descriptions in the title block to describe what the displayed property is. For this exact case. I had to change the name of my custom config specific property in my documents from “PartNumber” to “ItemNumber”. So the link is updating properly with this change and now reads properly the “ItemNumber” property. However the description text that is right above this linked annotation in the title block does not get updated as it Should get updated to say “Item Number (chinese description)” but it still says “Part Number (Chinsese description)” and doesn’t update. However if I manually update the sheet format by editing the sheet format, RMB properties, browse to my sheet format, then choose “OK” the format updates properly. Some things to note, the linked annotation and the text description are on different layers on the drawing, there is Simplified Chinese text being replaced if those have anything to do with the issue. Do you want me to send you the files so you can see? Thanks!

        Reply
        1. Deepak Gupta

          Will be nice to send me some file so that I can check what exactly you trying to do and where things getting wrose.

          Reply
  25. Dallas

    Hi Deepak,

    Do you have your assembly examples available anywhere?

    Specifically the Weight pulley lift example and flexi tube? These look great, I saw you tutorial on the flexi tube but I’m not sure how you are animating the rope to wind up the roller.

    Thanks,

    Dallas

    Reply
    1. Deepak Gupta

      Hi Dallas,

      I’ll be soon putting up the other flexi tube and animating ropes/roller tutorials. Please stay tuned 🙂

      Deepak

      Reply
  26. bindhu

    Hi Deepak,

    I am studying my final year in B.Eng Mechanical. I have been studying SolidWorks from past few months. My final project is the CFD analysis of two trains passing each other and totally depends on the use of this software. I am totally lost and worried as I, am not an expert in using this software. was just wondering if u could help me in clarifying some of my doubts. My university uses solidworks 2010 SP3 version and I, am using SW SP2 version. does SP3 supports the design n analysis carried out in SP2.

    thank you sir
    Bindhu.

    Reply
    1. Deepak Gupta

      Bindhu, yes there should not be any issues in the results.

      Reply
  27. brian lefevre

    Deepak, Do you know anything about why I would not be able to even get to the login screen in the SW forums? I get this error message:

    “Since your last login we have implemented changes intended to facilitate access to multiple Dassault Systèmes SolidWorks web portals. You will need to close all browser windows and restart the login process for those changes to be applied to your account.

    This message will not appear on subsequent logins. ”

    I’m not even sure what it means, no other windows are open and I can restart and it still gives the error prior to getting to the login screen.

    I also have not been able to search the forums. I need to know how to really strip old SW from my system. I can’t uninstall 2007 or 2009 and only want to have 2010 and 2011 running. In my registry I still show SW2000, 2002, 2003, 2004, and 2005 even though these have long been uninstalled. So I need some serious tech questions that my local support can’t do. I thought I would see if everyone has this problem since SW uses Windows VERY POORLY. Thanks for the help.

    Reply
    1. Deepak Gupta

      Brian, there were few changes made to customer portal so that is why you may be getting that . Even I too got this message few weeks back. You may restart your machine and check. Also what is your web browser??

      Regarding showing older version in registry will not be an issue as even latest version might be using few options from them. Though this is my assumption but there are few people on SW forums that claimed to have 2005 in the registry files.

      There is a utility available to complete remove the SW version from the machine. Also check these posts

      http://blog.alignex.com/mechanical-technical-blog-0/bid/7176/Top-10-Cleanup-Steps-before-Installing-SolidWorks-2009-by-Brian-Zias

      http://www.eng-tips.com/faqs.cfm?fid=488

      Reply
  28. N.Jay

    Hi Mr.Deepak

    I am very proud about you,

    I am belong to Tamil Nadu India and working as machine designer. Last 2 month here they expect lot from me.

    Thanks for your reply. Last five years i am working in SolidWorks ,but I am not expert like you. I’m asking you to support me, in my work as a friend

    When i work in new project i am facing lot of design difficulty in animation, and design analysis. In these situation I hope u can give some suggestions.

    http://www.mikejwilson.com/solidworks/solidworks_files-03.htm this link was very very useful for me

    Best Regards

    N.Jay

    Reply
    1. Deepak Gupta

      Jay, thanks for your thoughts 🙂

      Reply
  29. Rahul Sankapal

    Hi Deepak
    Do you have any CAD assembly in solidworks showing an Assebly betwwen ropes and pulley .
    Something like this http://www.youtube.com/watch?v=M9F9Gwf5hGw&feature=related

    My project is struck because of this issue and it would be of really great help if you could help me out

    Thanks and regards
    Rahul Sankapal

    Reply
    1. Deepak Gupta

      Rahul, give me sometime to present some example on this.

      Reply
    2. Deepak Gupta

      Rahul, did you had a chance to look at this video

      Roll On

      Reply
  30. Rik Stewart

    Deepak,
    I believe i have solved the elusive Design table issue
    ‘Unable to open DT using Excel 2XXX’

    I am using SolidWorks 2010[64 bit] with MS Office 2007 and had this same issue.
    “Unable to open design tables using excel 2007” I believe i have solved this issue.

    My fix:
    Go to your ‘C’ drive and drill down to the Microsoft office folder with your excel shortcut.

    Mine is located here; C:/prog files[x86] / Microsoft office/office12

    Right mouse click on the excel application icon and click properties.

    Uncheck the read only box and click apply.
    Do the same thing for the excel MS Office shortcut and click apply

    This solved my “Unable to open design tables using excel 2007” issues.
    Hope this helps.

    Rik Stewart
    rik.stewart@veoliawater.com
    Crown Solutions
    Dayton, Ohio

    Reply
    1. Deepak Gupta

      Thanks for sharing the info Rik. I haven’t came across this error but now I have a method to tackle this if it ever comes to me.. 😉

      Reply
  31. Mike

    I was wondering if you have seen a batch download feature for any of the standard parts from CarrLane or McMasterCarr on the http://www.3dcontentcentral.com website or any other place that I might get their files without having to select them individually off a website. I would like to get them in any CATIA compatible format and put them into our PDM Database. Any input would be appreciated, I have contacted McMaster and CarrLane directly and spoke with the engineering team, however they were less than helpful on this matter.

    The ultimate goal would be a folder with all the CarrLane catalog parts in it that I would then bulk upload into our database. Thanks again!

    Reply
    1. Deepak Gupta

      I don’t know if there is any way out other than to download single file. The best might be to get the CD-Rom version of their catalog.

      Here is link for Carrlane Catalog

      Reply
  32. Jorge

    Hello Deepak,
    i have a question for you, i have an assembly and i want to use this assembly for combine feature i want the assembly shape in one block, the problem starts here when you use a combine feature you can call a part only, you cannot call an assembly to use this feature i trying saving the assembly file like a part and after saved i was try to use the assembly saved like a part with a combine feature but doesnt works, im a packaging engineer i work with thermoforms i need only the shape on the assembly inside of one block if you know a different way to obtain the shape of the assembly please let me know.

    Reply
    1. Deepak Gupta

      You can save the assembly as part, open that saved part and then use combine option. Finally insert and subtract that from the packaging part.

      Other way can be to use cavity option in the assembly itself. Insert the packaging part in the assembly. Switch to part edit mode and edit the packaging part. Now go to Insert > Feature > Cavity and select the part you want to subtract from the packaging part.

      Let me know if this solve your issue or will make one example to explain.

      Reply
  33. Dheeraj

    Hi Deepak,
    I am using SW2009 (64bit Windows XP), while creating animation it uses like shit load of memory 30GB and while saving the rendered movie it says out of memory as in help it is mentioned that “ENABLE memory settings ensure that the system does not run out of memory and so can complete the render operation” but it didn’t happen after even enable that settings.Please help.

    Reply
    1. Deepak Gupta

      What is your system specs?? Graphics card, processor, HDD??

      How big is your assembly file??

      Reply
  34. Jerry Brian

    Hi Deepak,

    I am almost there… trying to get some functionality to my design table.

    I can make configurations, make a DT, make a pull down with data validation that works, but I can’t get the configuration to change when I pick an item choice.

    Can you tell me the steps?

    (I’m sure it’s using the if function).

    I can send you a screen shot if I get your e-mail.

    Thank You for your assistance in several SWforums.

    Jerry

    Reply
    1. Deepak Gupta

      Jerry,

      Thanks for your visit and kind words. Will it be possible for you to share the file and let me do some hands on before I give any comments.

      Also check this SolidWorks Excel Tips if it helps you.

      Reply
  35. Jason Corl

    Hey Deepak,

    I’m wondering if you know how to dissect the feature usage used to create the spring parts generated with the awesome spring macro on 3D Content Central? Particularly the compression closed and ground flat spring. http://www.3dcontentcentral.com/macros/177/files/macro.aspx?id=179350

    This macro creates great spring models but they are not configurable. I’m looking to make springs with the same technique but configurable. Any ideas?

    Thanks,

    Reply
    1. Deepak Gupta

      You need to create a series of helix combined into a 3D sketch and finally the sweep to get that kind of spring.

      Reply
  36. Ramit Aggarwal

    Hey Deepak,

    I am an undergrade student at a university in States and need your help in Solid Works. I am New Delhi these days. I would appreciate if you could help me with that.
    Thanks.

    Reply
  37. Tommy McDonald

    You made some good points there. I did a search on the topic and found most people will agree with your blog.

    Reply
  38. Vamsidhar

    Hi Deepak,

    Thanks for your reply. I really appreciate your time on this.

    Do you mean – Solidworks drawing can be exported to a excel, txt, csv format which contains all the part / sub-assembly information ?.

    Best Regards and Thanks in advance for your time and reply.

    Vamsidhar

    Reply
    1. Deepak Gupta

      Not SolidWorks drawing but the BOM.

      Reply
  39. Vamsidhar

    Hi Deepak,

    Looks like you are expert on SolidWorks,

    I have a few questions.

    1. How do I get the data on the components of the Bill of Material out of a Drawing. ? I mean, is there an API for that. (In any language?).
    2. Can I contact you.

    This is because we have a ETO solution and would like see whether we can connect our solution with SolidWorks to extract the BOM data from the SolidWorks drawings and push in to our data.

    Can You please contact me on my email, if you can., I am however selecting the notify the check box below.

    Thanks

    Vamsidhar

    Reply
    1. Deepak Gupta

      Vamsidhar, you can save your BOM in excel, txt or csv format. You’ll have to check what format your ETO program can accept. And I’m sure there is an example as well as some macro available.

      And I’ll be happy to assist you. Please check your inbox for my contact details.

      Reply
  40. Moreshwar Mane

    Hi Deepak,

    Grt8 work keep it up. I appreciate your work of knowledge sharing with other. All the very best.

    Can you please help me to know how some of the animations done in 3d software. I have seen many animations done in various 3d cad software and also few in SolidWorks. But what I what to known, is how do they show the flow of particles from one part to another. For e.g. the flow of fine powder falling from one bin to another or air movement. Is it done in some other software or SolidWorks. If yes then please let me known which software. Currently I am using SolidWorks2009, can it be done in this? Please help.

    Thank you in advance.

    Reply
    1. Deepak Gupta

      Moreshwar, though I’m not an expert with FEA/CFD but yes I have seen few example of what you talking about.

      Check the Air Flow demo in this link http://www.solidworks.com/sw/DemoLibrary/flow-simulation-software.htm. I believe there are some high end software available for these kinds of simulation. I’ll check and let you know

      Reply
      1. Deepak Gupta

        Check this discussion on SolidWorks Forum “Can I use Flow Simulation to analyse micro particle movement ?

        Reply
  41. V. Ravi

    Hi Deepak!

    Amazing! I havn’t seen such a big blog with complete details on your workings! good!.

    I’m from chennai – with polymer selling background and turn into media now! let’s be in touch!

    best wishes!

    Ravi

    Reply
  42. Anand

    Dear Mr Deepak

    I am an amateur hobbyist and 3d enthusiast.

    For a mere hobbyist purchasing SolidWorks is out of the question. Is there a way people like me can purchase older version of SolidWorks at a lower price?

    Any suggestion would be welcome.

    Thanks and regards
    Anand

    Reply
    1. Deepak Gupta

      Anand,

      I don’t think SolidWorks has any similar offers for you. But you can have a look at SolidWorks Engineering Stimulus Package . Also you can go for a basic package of SolidWorks. Have a look at SolidWorks Product Matrix. Let me know if you need more details.

      Reply
  43. Thomas Arthur Nielsen

    Hi.
    A greeting from denmark. Nice blog.

    Thomas A. Nielsen (SwErfa.dk)

    Reply
  44. Arie Ruitenbeek

    Heelo Deepak Gupta

    I am looking for a macro to save drawings in SW 2009 to Autocad dwg

    thanks for all

    greetings

    Arie

    Reply
  45. Ed

    We corresponded via alt newsgroup regarding SW office disappearing SWX 2009 x64. Did the reinstall worked great now its disappearing again. Any ideas appreciated.

    Reply
    1. Deepak Gupta

      Ed,

      Is the problem with the Tool bar or the add ins. Did you tried to check if add ins are working. If yes then your toolbar is missing. Just right click on any of the toolbar and select the SW office toolbar.

      And thanks for your inputs on the blog, I appreciate them.

      Reply
      1. Ed

        Add ins are checked and when I right click the toolbar they’re all there. Weird, Did a reinstall of PW and its fine, Really unusual as SW installs are typically stable.

        Reply
  46. praveen gupta

    hi!

    Bullethawk Racing is the Formula SAE team of NSIT participating in Student Formula SAE Competition of Japan to be held in September, 2009.

    we are in search for some sort of help in solidworks to make our rolling chassis which is nothing but a whole car model including body works.

    regards
    praveen gupta

    Reply
  47. Sachin Nalawade

    Hello Deepak,

    Nice to see your blog on SolidWorks, great work to help SolidWorks community.

    Sachin Nalawade

    Reply
  48. Viren

    Hi Deepak,

    Went through your blog, pretty impressive.

    Reply
  49. Sudharshan

    Hi Deepak, I would appriciate if you can help me with a macro which can delete the existing layers in the drawing and create 5 new layers with black, green, red, brown and yellow colors all with line thickness of 0.0138 thickness.

    Thanks
    Sudharshan

    Reply
  50. Chris

    Deepak,

    How did you create the Spring Animation?

    http://www.swgeeks.com/video/spring-animation

    I have a SW assembly that contains a few springs and i would to learn how to animate the springs. Is it possible you could send that assembly file/parts so i could analyze them and learn.

    thank you sir!

    Chris

    Reply

I'll be happy to know your views and opinions as this will help me to improve. You can share them as comments below.

%d bloggers like this: